Introduction

There are a lot of parts to a bathroom renovation, and it can be easy to get lost in the details. We’ve put together this guide to help you navigate the process so that you end up with a beautiful new space for your home!

Scrubbing the floor

Scrubbing the floor is a good way to get rid of bacteria and germs. It’s also a great way to remove dirt and grime, making your bathroom look clean and fresh again!

Removing the old wallpaper

Removing the old wallpaper is one of the most important parts of renovating your bathroom. The best way to remove the paper is with a wallpaper scraper or paint scraper. You can also use a razor blade or screwdriver (or even a hammer) if you don’t have either of these tools on hand.

The first step in removing wallpaper is scraping off any loose pieces using your tool of choice so that they don’t get left behind when you’re done scraping up all the other pieces around them. Then it’s time for some serious prying! Using both hands and even more tools than just those two mentioned above, pull away at each piece until there’s nothing left but thin strips hanging off from their corners like ivy vines in an old house attic–this will take some time but it’ll be well worth it when everything else goes up tomorrow morning!

Installing new tiles, linoleum, or other flooring material

The first step in renovating a bathroom is to choose the right material. Choose linoleum, laminate flooring, or tile; each has its own advantages and disadvantages. Laminate floors are easier to install than tile but don’t last as long and can become stained with water from cleaning products. Tile takes more time to install but has a longer lifespan compared with vinyl sheeting or linoleum (which will wear out faster).

Other factors you should consider when choosing your flooring material include how much traffic it will receive and whether or not it should be sealed against moisture damage by sealing compound or paint primer before installation begins. If you’re handy at all, then installing yourself might save money over hiring professionals because there’s no need for them if everything goes smoothly during installation itself!

Installing a new sink and faucet

• Installing new drain
• Installing a new garbage disposal , if it’s working properly. If not, replace it with one that is as good as or better than your old one. This can be tricky because there are many different types of garbage disposals available on the market today. You may have heard about ” electric ” vs ” gas “, but there are other factors like noise level and size that affect what kind of unit you should choose for your home. For example, we recommend using an electrical-powered model rather than one fueled by natural gas so that you don’t have to worry about fumes leaking into the basement where they could cause problems down the road (i ).

Hanging a new shower curtain

Hanging a new shower curtain can be a simple and straightforward task, but it’s important to pay attention to the details. First, measure the length of your existing shower curtain so that you know how much slack there is in order to hang your new one. Then, choose what type of material will work best for this particular project–you may want something more durable than vinyl or plastic (especially if your bathroom walls are already textured).

Next up: hanging! Begin by removing any old hardware on the wall where you plan on installing your new curtain rod. Next, mark where each screw hole will go with paint or tape before securing them into place with screws–this way they won’t come loose during installation later on down road once everything else has been installed properly first!

Finally–and perhaps most importantly–make sure not only does each hole line up evenly but also aligns directly above its neighbor so as not too small either side pushes through into neighboring holes causing problems later down line when trying install additional accessories such as hooks etcetera…

Installing a new toilet seat and lid

Installing a new toilet seat and lid is not something that everyone does, but it’s an important part of the renovation process. A new toilet seat is important because it will keep your hands dry and clean when you’re using it. It also makes sure that you don’t fall in while on the toilet, which can be dangerous if you are elderly or have any other medical issues.

The best way to install a new toilet seat is with self-adhesive foam tape that comes with a spray adhesive gun. After applying some pressure to push out air bubbles from underneath the lid, carefully place each piece onto your existing hole in your bowl until there are no gaps between them anymore! Then add more pressure again until you’ve created enough resistance so nothing falls through anymore either (this step may require some trial-and-error). Afterward let everything sit overnight before removing them early next morning since they’ll start drying out during this time period too!

Adding new fixtures below the sink (such as a medicine cabinet)

Adding a medicine cabinet below the sink is one of the most important steps in renovating your bathroom. A good-quality medicine cabinet will help keep all of your bathroom tools organized, and it’s also an easy way to add storage space for toiletries and other items that might otherwise be scattered across countertops and floorboards.

To install a medicine cabinet:

• First, measure where you want to place it on the wall (usually about three inches from the top edge) and mark with tape or pencil where holes need to be cut for mounting hardware such as screws or nails. Then use an electric drill with bit large enough for drilling through the drywall into studs behind your new fixture so that when finished installing it can still be removed easily if need be later down the road after remodel has been completed.

You need to spend time planning the renovation to make sure it goes smoothly

Planning is important. It’s a good way to avoid problems, it helps you budget and save money on materials, it helps you avoid mistakes at home, and it also gives your bathroom renovations toronto team some time to work safely before starting work on the bathroom itself.

You should plan for every phase of the renovation: from choosing materials through finishing touches like painting or carpeting; even planning out how long it will take each part of the process (e.g., installing new fixtures).

Conclusion

Now that you know what’s involved in renovating a bathroom, we hope you have a better idea of how much time and effort will go into your project. If this is something that interests you, we hope our guide has been helpful in giving you insight into the process and what kinds of things might make it easier or more difficult. Whatever route you choose to take with your renovation project—whether it be remodeling or updating instead—we wish all homeowners good luck!